Assoc. Prof. Michael Regev

1. 1. Regev, S. Berger and B. Z. Weiss: “Investigation of Microstructure, Mechanical and Creep Properties of Weldments between T91 and T22 Steels”, Welding Journal (Research Supplement), Volume 75, Number 8, pp. 261s – 268s (1996)
   2. Regev, E. Aghion and A. Rosen: “Creep Studies of AZ91D Pressure Die Casting”, Materials Science and Engineering A, Vol. A234-236, pp. 123-126 (1997)
   3. Regev, E. Aghion, M. Bamberger and A. Rosen: “Creep Studies of Coarse Grained AZ91D Magnesium Alloy”, Materials Science and Engineering A, Vol. A252, pp. 6-16 (1998)
   4. Regev, E. Aghion, M. Bamberger S. Berger and A. Rosen: “Dislocation Analysis of Crept AZ91D Ingot Casting” , Materials Science and Engineering A, Vol. A257, pp. 349-352 (1998)
   5. Regev, O. Botstein, M. Bamberger and A. Rosen: “Continuous vs. Interrupted Creep in AZ91D Magnesium Alloy”, Materials Science and Engineering A, Vol. A302/1, pp. 51-55 (2001)
   6. Regev, A. Rosen and M. Bamberger: “Qualitative Model for Creep of AZ91D Magnesium Alloy”, Metallurgical and Materials Transactions A, Vol. 32A, pp. 1335-1345 (2001)
   7. Spigarelli, M. Regev, E. Evangelista and A. Rosen: “A Review of the Creep Behavior of AZ91 Mg Alloy Produced by Different Technologies”, Materials Science and Technology, Vol. 17, pp. 627-638 (2001)
   8. Regev, H. Rosenson and Z. Koren: “Microstructure Study of Particle Reinforced AZ91D and AM50 Magnesium Alloys Semisolid Casting”, Materials Science and Technology, Vol. 23, pp. 1485-1491 (2007)
   9. Ben-Hanan, H. Judes and M. Regev: “Comparative Study of Three Different Types of Dental Diamond Burs”, Tribology – Materials, Surfaces & Interfaces, Vol. 2, pp. 77-83 (2008)
   10. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev: “Bulk Metallic Glass Formation in the Mg₈₀Cu₁₅Y₅ System”, Materials Science and Technology, Vol. 25, pp. 1227-1233 (2009)
   11. Regev, H. Judes and U. Ben-Hanan: “Wear Mechanisms of Diamond Coated Dental Burs”, Tribology – Materials, Surfaces & Interfaces, Vol. 4, pp. 38-42 (2010)
   12. Regev, H. Rosenson, Z. Koren and A. Katz-Demyanetz: “The Influence of the Cooling Rate on Bulk Metallic Glass Formation in Mg₈₀Cu₁₅Y₅ and Mg₈₀Cu₁₀Y₁₀ “, Journal of Materials Science, Vol. 45, pp. 6365-6373 (2010)
   13. Spigarelli, M. El Mehtedi and M. Regev: “Enhanced Plasticity and Creep in an Extruded ZK60 Alloy”, Scripta Materialia, Vol. 63, pp. 617-620 (2010)
   14. Cabibbo, P. Ricci and M. Regev: “Nanoindentation Applied to an Optimized FSW-AZ31 Butt Joint”, Kovove Materialy – Metallic Materials, Vol. 49, pp. 233-242 (2011)
   15. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev: “Thermal Stability and DSC Studies of Melt-spun Mg₈₀Cu₁₅Y₅ and Mg₈₀Cu₁₀Y₁₀“, Journal of Materials Science and Engineering A (formerly part of Journal of Materials Science and Engineering), Vol. 1 pp. 168-173 (2011)
   16. Spigarelli, M. El Mehtedi and M. Regev: “Effect of Grain Size on High Temperature Deformation of AZ31 alloy”, Materials Science and Engineering A, Vol. 528, pp. 6919-6926 (2011)
   17. Spigarelli, M. Regev, M. El. Mehtedi, G. Quercetti and M. Cabibbo: “Analysis of the Effect of Friction Stir Welding on the Minimum Creep Rate of a Mg-3%Al-1%Zn Alloy”, Scripta Materialia, Vol. 65, pp. 626-629 (2011)
   18. Spigarelli, M. El Mehtedi, M. Regev and E. Gariboldi: “High Temperature Creep and Superplasticity in a Mg-Zn-Zr Alloy”, Journal of Materials Science and Technology, Vol. 28, pp. 407-413 (2012)
   19. Ben-Hanan, M. Regev and H. Judes: “Temperature Measurements During Dental Cutting Using an Internally Cooled Diamond Dental Bur”, Journal of Materials Science and Engineering B Vol. 2, pp. 551-559 (2012)
   20. Regev and S. Spigarelli: “Plastic Deformation Mechanisms of Base Material and Friction Stir Welded AZ31B-H24 Magnesium Alloy”, Materials Sciences and Applications, Vol. 4, pp. 357-364 (2013)
   21. Regev, M. El Mehtedi, M. Cabibbo, G. Quercetti, D. Ciccarelli and S. Spigarelli: “High Temperature Plasticity of Bimetallic Magnesium a nd Aluminum Friction Stir Welded Joints”, Metallurgical and Materials Transactions A, Vol. 45A, pp. 752-764 (2014)
   22. Regev, S. Spigarelli and M. Cabibbo: “Microstructure Stability During Creep of Friction Stir Welded AZ31B Magnesium Alloy”, ASME Journal of Manufacturing Science and Engineering, Vol. 137, pp. 051021-1 – 051021-8 (2015)
   23. Regev, S. Essel and A. Katz-Demyanetz: “Microstructure Characterization of Melt Spun Mg₆₅Cu₂₅Y₁₀“, Kovove Materialy – Metallic Materials, Vol. 55, pp. 1-5 (2017)
   24. Larianovsky, A. Katz-Demyanetz, E. Eshed and M. Regev: “Microstructure, Tensile and Creep Properties of Ta₂₀Nb₂₀Hf₂₀Zr₂₀Ti₂₀ High Entropy Alloy”, Materials, Vol. 10, pp. 883-1 – 883-12 (2017)
   25. M. Regev , T. Rashkovsky, M. Cabibbo and S. Spigarelli: “Microstructure Stability During Creep of Friction Stir Welded AA2024-T3 Alloy”, Journal of Materials Engineering and Performance, 27, pp. 5054-5063 (2018)
   26. Paoletti, M. Regev and S. Spigarelli: “Modelling of Creep in Alloys Strengthened by Rod-Shaped Particles: Al-Cu-Mg Age-Hardenable Alloys”, Metals, Vol. 8, pp. 930-1 – 930-18 (2018)
   27. M. Regev and S. Spigarelli: “Study of Mechanical, Microstructural and Thermal Stability Properties of Friction Stir Processed Aluminum 2024-T3 Alloy”, Kovove Materialy – Metallic Materials, Vol. 57, pp. 229-236 (2019)
   28. Santecchia, M. Cabibbo , M. Ghat , M. Regev and S. Spigarelli: “Physical Modeling of the Creep Response of an Al-Cu-Mg Alloy With a Fine Microstructure Transformed by Friction Stir Processing”, Materials Science and Engineering A, Vol. 796, article 138521 (2020)
   29. M. Regev and S. Spigarelli: “Microstructure, Thermal Stability During Creep and Fractography Study of Friction Stir Processed AA2024-T3 Aluminum Alloy”, Journal of Materials Engineering and Performance, Vol. 29, pp. 4872-4878 (2020)
   30. A. Katz-Demyanetz, M. Bamberger and M. Regev: “Quantitative Microstructure Study of Melt Spun Mg65Cu25Y10”, SN Applied Sciences, Vol. 2, article 1811 (2020)
   31. M. Regev and S. Spigarelli: “A Study of the Metallurgical and Mechanical Properties of Friction-Stir-Processed Cu”, Metals, Vol. 11, pp. 656-1 – 656-11 (2021)
   32. C. Paoletti, E. Santecchia, M. Cabibbo , M. Regev and S. Spigarelli: “Revisiting Copper as a Case Study of Creep in Pure Metals: Prediction of Creep Response in Pure Cu in Half-Hard and Friction-Stir-Processed States”, Materials Science and Engineering A, Vol. 832, article 142426 (2022)
   33. M. Regev and S. Spigarelli: “Microstructural Changes During Creep and Fractography study of Friction Stir Processed Commercially Pure Cu”, Journal of Materials Engineering and Performance, Vol. 31, pp. 7031-7038 (2022)
   34. M. Regev, B. Almoznino and S. Spigarelli: “A Study of the Metallurgical and Mechanical Properties of Friction-Stir-Welded Pure Titanium”, Metals, Vol. 13, pp. 524-1 – 524-13 (2023)

1. M. Regev, E. Aghion, M. Bamberger and A. Rosen: “Creep Studies of AZ91D Castings”, Proceedings of DGM International Conference on Magnesium Alloys and Their Applications, pp. 283 – 288 (1998)
2. M. Regev, A. Rosen and M. Bamberger: “Structural Stability and Creep Properties of AZ91”, Proceedings of the 1999 Annual Meeting, San Diego, California, pp. 163 – 170 (1999)
3. M. Regev, D. Kalinka and S. Spigarelli: “Deformation Mechanisms Operating During Creep of Friction Stir Welded AZ31B Magnesium Alloy”, Conference Proceedings of the 9th International Conference on Magnesium Alloys and Their Applications, Vancouver, Canada, ISBN number 978-0-615-67510-7, pp. 923-928(2012)
4. M. Regev and S. Spigarelli: “Plastic Deformation Mechanisms Operating in Parent Metal and Friction Stir Welded AZ31B Magnesium Alloy”, Conference Proceedings of the 7th Asia Pacific IIW International Conference, Singapore, pp. 523-527 (2013)
5. M. Regev and S. Spigarelli: “Microstructure Stability During Creep of Friction Stir Welded AZ31B-H24 Magnesium Alloy and AA2024-T3 Aluminum Alloy”, Proceedings of IIW 2017 International Conference, Shanghai, P.R. China, pp. F13-F20 (2017)
6. M. Regev and S. Spigarelli: “Microstructural Processes Occurring During Creep of Friction Stir Welded AA2024-T3 Alloy”, Proceedings of IIW 2019 International Conference, Bratislava, Slovakia, paper 000031 (2019)

Other Conference Proceedings:

1. A. Finkel, M. Regev, E. Aghion, M. Bamberger and A. Rosen: “Aging Studies of AZ91D Casts”, Proceedings of The First Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel, pp.121-126 (1997)
2. S. Spigarelli, M. Cabibbo, E. Evangelista, M. Regev and A. Rosen: “Process and Microstructural Effects on the Creep Properties of the AZ91 Magnesium Alloy”, Proceedings of the Second Israeli International Conference on Magnesium Science and Technology, Dead Sea, Israel, pp. 293-300 (2000)
3. M. Regev, O. Botstein and A. Rosen: “The Influence of the Microstructure on the Creep Properties of AZ91D Magnesium Alloy – Continuous vs. Interrupted Creep”, Proceedings of the Second Israeli International Conference on Magnesium Science and Technology, Dead Sea, Israel, pp. 301-307 (2000)

1. M. Regev: “Fire-side Corrosion in Coal Fired Steam Boilers of Power Plants”, Mechonot, Nov. 1992, pp. 5-7 (in Hebrew)
2. M. Regev: “Creep Mechanisms in Steam Boiler Tubes Made of T22 Steel”, Mechonot, Mar. 1994, pp. 28-30 (in Hebrew)
3. M. Regev and O. Botstein: “Scanning Electron Microscopy and its Applications for Researchers and Engineers”, Mechonot, Jun. 1999, pp. 8-12 (in Hebrew)

Theses:

1. Ph.D. “The Influence of the Microstructure on the Creep Properties of AZ91D Magnesium Alloy”
   Research conducted under the supervision of Professor A. Rosen and Associate Professor Menachem Bamberger.
2. M.Sc. “The Influence of Thermal Processes on the Properties of T22 Steel to T91 Steel Weldments”
   Research conducted under the supervision of Professor B.Z. Weiss and Dr. Shlomo Berger.

Technical Reports:

1. “Friction Stir Welding – Review”, submitted to RAFAEL – Report No. 2004/M2/001, February 2004 (in Hebrew)
2. “Development of Nano/Sub-micron Particle Reinforced Light Alloys”, submitted to the Israel Institute of Metals, October 2006 (in Hebrew)
3. M. Regev, U. Ben-Hanan: “Comparative Examination of Three Different Types of Dental Burs”, submitted to Strauss & Co., November 2006 (in Hebrew)
4. “Development of Nano/Sub-micron Particle Reinforced Light Alloys”, submitted to the Israel Institute of Metals, December 2006 (in Hebrew)
5. U. Ben-Hanan, M. Regev: “Grinding Zirconia – Comparative Study of Three Different Types of Dental Burs”, submitted to Strauss & Co., November 2009 (in Hebrew)

Conference Presentations:

1. May 30,1996 – The 30th Annual Meeting of the Israel Society for Microscopy, Haifa, Israel
2. October 22,1996 – The National Welding Conference, Shfaim, Israel
3. April 16-17,1997 – The Eighth Israel Materials Engineering Conference – IMEC VIII, Beer-Sheva, Israel
4. August 25-29, 1997 – Eleventh International Conference on the Strength of Materials – ICSMA-11, Prague, Czech Republic
5. November 10-12, 1997 – The First Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel
6. April 28-30,1998 – Magnesium Alloys and Their Applications Conference, Wolfsburg, Germany
7. December 6-7, 1999 – The Ninth Israel Materials Engineering Conference – IMEC IX, Haifa, Israel
8. February 22-24, 2000 – The Second Israeli International Conference on Magnesium Science & Technology, Dead Sea, Israel
9. May 10-11, 2006 – The 7th Israeli Conference on Corrosion and Electrochemistry, Bar-Ilan University, Ramat-Gan, Israel
10. July 11-12, 2006 – The 2nd Ort Braude College Interdisciplinary Research Conference, Ma’alot, Israel
11. September 10-11, 2007 – EUROMAT 2007, Nürnberg, Germany
12. October 8-9,2007 – The 3rd Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel
13. December 9-10, 2007 – The 13th Israel Materials Engineering Conference – IMEC 13, Haifa, Israel
14. October 22-23,2008 – The 4th Ort Braude College Interdisciplinary Research Conference, Nazareth Ilit, Israel
15. September 7-10, 2009 – EUROMAT 2009, Glasgow, UK
16. October 14-15,2009 – The 5th Ort Braude College Interdisciplinary Research Conference, Nahariya, Israel
17. December 13-14, 2009 – The 14th Israel Materials Engineering Conference – IMEC14, Tel-Aviv, Israel (presented by Dr. A Katz)
18. April 21-23, 2010 – IWNCS 2010, Barcelona, Spain
19. October 13-14, 2010 – The 6th Ort Braude College Interdisciplinary Research Conference, Haifa, Israel
20. January 26-28, 2011 – CIRP winter meeting, Paris, France (presented by Dr. U. Ben-Hanan)
21. September 19-20, 2011 – The 7th Ort Braude College Interdisciplinary Research Conference, Kfar-Blum, Israel
22. January 25-27, 2012 – CIRP winter meeting, Paris, France (presented by Dr. R. Wertheim)
23. July 8-12, 2012 – 9th International Conference on Magnesium Alloys and their Applications, Vancouver, BC, Canada
24. October 17-18, 2012 – The 8th Ort Braude College Interdisciplinary Research Conference, Acre, Israel
25. July 8-10, 2013 – The 7th Asia Pacific IIW International Conference, Singapore
26. October 2-3, 2013 – The 9th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel
27. December 2-6, 2013 – THERMEC 2013, Las Vegas, USA (invited talk)
28. May 20-22, 2014 – 10th FSW Symposium, Beijing, China
29. October 19-20, 2014 – The 10th Ort Braude College Interdisciplinary Research Conference, Nahariya, Israel
30. March 22-25, 2015 – BIT’s 1^st Annual World Congress of Smart Materials, Busan, Republic of Korea (including chairmanship)
31. October 7-8, 2015 – The 11^th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel
32. May 29-June 3, 2016 – THERMEC 2016, Graz, Austria (invited talk)
33. September 28-29, 2016 – The 12^th Ort Braude College Interdisciplinary Research Conference, Hagoshrim, Israel
34. June 29-30, 2017 – IIW 2017, Shanghai, P.R. China
35. September 17-21, 2017 – EUROMAT 2017, Thessaloniki, Greece (keynote lecture)
36. October 25-26, 2017 – The 13^th Ort Braude College Interdisciplinary Research Conference, Nahsholim Seaside Resort, Israel
37. July 8-13, 2018 – THERMEC 2018, Paris, France (invited talk)
38. October 17-18, 2018 – The 14^th Ort Braude College Interdisciplinary Research Conference,  Kfar-Blum, Israel
39. July 11-12, 2019 – IIW 2019, Bratislava, Slovakia (including chairmanship)
40. September 1-5, 2019 – EUROMAT 2019, Stockholm, Sweden
41. October 23-24, 2019 – The 15^th Ort Braude College Interdisciplinary Research Conference, Kfar-Blum, Israel
42. May 10-14, 2021 – THERMEC 2021, Virtual Conference (invited talk)
43. September 13-17, 2021 – EUROMAT 2021, Virtual Conference
44. February 21, 2023 – Israeli International Section of the AWS (invited talk)